Duroxite 100 wire

Duroxite 100 wire is a flux-cored welding wire for hard facing components subject to severe sliding wear and moderate to low impact applications using an open-arc welding process. Duroxite 100 wire is suitable for single-layer or multiple-layer deposits up to a maximum of three layers.

Importantly, Duroxite 100 WIRE guarantees same wear resistance from surface through 75% depth of overlay in multi-layer deposit. Optimal alloy formulation that forms a carbide composition which provides a good combination of wear resistance and homogenous bonding. Superior features of Duroxite 100 WIRE are best applied in applications of hard facing wear parts undergoing wear by earth, sand and abrasives up to 350°C.

Key benefits

  • Same wear resistance guaranteed from surface through 75% depth of overlay in multi-layer deposit
  • Optimal alloy formulation that forms a carbide composition which provides a good combination of wear resistance and homogenous bonding

Typical Applications

Duroxite 100 WIRE is mainly designed to use for hard facing wear parts undergoing wear by earth, sand and abrasives up to 350°C (660°F). Typical examples include: Crusher hammers, gyratory crusher cones and mantles, dredge pumps, slurry pipes, dragline bucket liners, coal pulverizer rolls, coke hammers, sand dredging parts, mining and earthmoving components, and sorting screens

Duroxite 100 wire
Mechanical Properties

Classificartions

DIN 14700 T Fe15 G

 DIN 8555 MF 10 GF 60 G

 

Typical all-weld metal chemical composition (wt. %)

 

 C  Mn Si  Cr  Fe
 4.7  0.2 0.6 27.0 Balance

 

Typical all-weld metal surface hardness 2)

 

Three-layer deposit on mid steel: 60-62 HRC
Standard Dimensions
 Standard Diameter Metric Imperial
   1.6mm 1/16"
Delivery Conditions
Standard
package
Diameter   Type Weight  
   Metric Imperial   Metric Imperial
   1.6mm  1/16"  Spool  15kg  33 lb

Tech Support

Documents to download