HARDOX® Tubes
WEAR RESISTANCE. BUILT INTO THE PIPE
Longer wear life for abrasive material handling

Wear Resistance from the Inside Out
Hardox® Pipes and Tubes bring the proven hardness, toughness and wear resistance of Hardox® wear steel into a circular tubular format. Designed for applications exposed to severe internal or external wear, they provide a high-performance alternative to conventional steel pipes and other wear-resistant piping solutions.
Available as Hardox® 400 Tube and Hardox® 500 Tube, they are particularly suitable for transporting abrasive materials such as concrete, slurry, soil, gravel, sand and ore.
Hardox® 400 and Hardox® 500 Tubes
Hardox® 400 Tube combines a nominal hardness of 400 HBW with high toughness and structural strength. It provides an excellent balance between wear resistance, impact resistance and workshop performance.
Hardox® 500 Tube, with a nominal hardness of 500 HBW, provides significantly higher wear resistance for applications where severe abrasion is the dominant wear mechanism and extended service life is required.
Both grades are through-hardened, providing wear resistance throughout the tube wall rather than only at the surface.
Why Choose Hardox® Pipes and Tubes?
Longer Wear Life
The high hardness of Hardox® steel provides excellent resistance to abrasive wear. Compared with conventional mild-steel pipes, this can significantly extend service life and reduce replacement frequency.
Hardox® 400 or Hardox® 500
The two hardness levels make it possible to select the right balance between wear resistance, toughness and operating conditions.
Hardox® 400 Tube is an excellent choice when wear resistance and high toughness are required, while Hardox® 500 Tube provides increased protection in more severe abrasive environments.
Uniform Properties – Including the Weld
Hardox® Pipes and Tubes are roll formed and plasma welded before quenching. This production process ensures that the weld achieves the same mechanical properties as the rest of the material.
The result is a durable and consistent wear-resistant tube suitable for demanding operating conditions.
High Strength and Toughness
Hardox® Pipes and Tubes combine wear resistance with high mechanical strength and toughness. This makes them suitable not only for transporting abrasive materials but also for selected structural applications exposed to external wear.
Excellent Workshop Performance
Despite their high hardness, Hardox® 400 and Hardox® 500 Tubes can be welded, cut, milled and drilled using established workshop practices.
This makes them easier to integrate into existing equipment and material-handling systems.
More Than a Conventional Steel Pipe
Conventional mild-steel pipes can wear rapidly when continuously exposed to abrasive materials.
Typical Applications
Hardox® Pipes and Tubes are particularly suitable for:
•Concrete pumping
•Slurry transport
•Sand and gravel handling
•Mining and quarrying
•Dredging
•Cement production
•Recycling equipment
•Ore and mineral handling
•Agricultural bulk material transport
•Suction and discharge lines
•Structural components exposed to wear
Hardox® Pipes and Tubes provide built-in wear resistance throughout the wall thickness, helping eliminate the need for more complex solutions such as heavy cast wear pipes, double-wall constructions or hardfaced overlay pipes in suitable applications.
This can result in a lighter, simpler and more wear-resistant solution.
Longer Life. Less Maintenance.
Hardox® Pipes and Tubes combine high wear resistance, toughness and structural strength in a ready-to-use circular product.
With Hardox® 400 Tube and Hardox® 500 Tube, manufacturers can select the appropriate hardness level according to the severity of wear and operating conditions.
The result can be longer replacement intervals, fewer maintenance stops, reduced downtime and lower overall operating costs.
Choose Hardox® Pipes and Tubes when abrasive material flow demands more than a conventional steel pipe – available in Hardox® 400 and Hardox® 500 for demanding wear applications.
Mechanical Properties
Product type | Wall Thickness | Hardness 1) |
|---|---|---|
Hardox 450 | 2.5 - 6.0 | 470 - 530 |
Hardox 500 | 3.0 - 6.0 | 470 - 530 |
1) Brinell hardness test, HBW, according to EN ISO 6506-1.
Standard Dimensions

Tolerances

1)All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
Chemical Compositions

Chemical Composition (heat analysis)
C | Si | Mn | P | S | Cr | Ni | Mo | B |
|---|---|---|---|---|---|---|---|---|
0.30 | 0.70 | 1.60 | 0.020 | 0.010 | 1.50 | 1.5 | 0.60 | 0.005 |
The steel is grain refined.
Carbon Equivalent CET(CEV)
Wall Thickness | Hardox 500 |
|---|---|
Typical CET(CEV)(%) | 0.41 (0.62) |





