Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

HARDOX® 500

HARDER STEEL. LONGER WEAR LIFE

High hardness for maximum wear resistance and durability

Hardox 500

High Wear Resistance for Demanding Applications

Hardox® 500 is a high-hardness wear-resistant steel designed for demanding applications where excellent abrasion resistance and long service life are essential. With a nominal hardness of 500 HBW, it provides significantly higher wear resistance than lower-hardness wear steels while maintaining good toughness and workshop performance.

Hardox® 500 is particularly suitable for components exposed to severe sliding and abrasive wear, where longer service intervals and reduced maintenance can have a major impact on operating efficiency.

High Hardness for Longer Wear Life

The main advantage of Hardox® 500 is its 500 HBW nominal hardness. Higher hardness provides increased resistance to abrasive wear, helping components maintain their shape and functionality for longer.

Compared with Hardox® 450, Hardox® 500 can provide a significant increase in service life in highly abrasive environments. The actual improvement depends on the abrasive material, operating conditions, component design and wear mechanism.

Why Upgrade to Hardox® 500?

Higher Wear Resistance

The increased hardness provides excellent resistance to abrasion, making Hardox® 500 an effective solution for components continuously exposed to abrasive materials.

Longer Service Life

Higher wear resistance can extend component life, reducing replacement frequency and increasing equipment availability.

Lower Maintenance Costs

Longer-lasting wear parts mean fewer replacements, less maintenance and reduced downtime. This can significantly lower the total cost of ownership over the lifetime of the equipment.

Reduced Material Consumption

Longer component life means fewer replacement parts are required over time. In suitable applications, the higher wear resistance can also create opportunities to optimize plate thickness and reduce material consumption.

Good Workshop Properties

Despite its high hardness, Hardox® 500 maintains good workshop performance. It can be cut, welded, bent and machined using appropriate methods and equipment, allowing efficient production of demanding wear components.

Designed for Severe Abrasive Wear

Hardox® 500 is especially effective in applications where abrasive wear is the dominant wear mechanism.

Its high surface hardness helps resist material loss caused by sliding, scraping and contact with abrasive materials such as rock, minerals, sand, gravel and recycled material.

This makes Hardox® 500 an excellent choice when wear life is the primary requirement and components must withstand continuous abrasive conditions.

Typical Applications

Hardox® 500 is widely used for:

•Wear liners

•Chutes and hoppers

•Crushers and recycling equipment

•Screens and sieves

•Excavator and loader buckets

•Cutting edges and wear strips

•Mining and quarrying equipment

•Concrete and aggregate handling equipment

•Heavy-duty wear components

•More Wear Resistance. Longer Service Life.

Hardox® 500 provides a powerful combination of 500 HBW hardness, high abrasion resistance and good toughness, making it a reliable solution for demanding wear applications.

For equipment operators and manufacturers, the higher wear resistance can provide longer replacement intervals, reduced downtime, lower maintenance requirements and improved operating efficiency.

Choose Hardox® 500 when severe abrasive wear demands higher hardness, longer component life and reliable performance.

Applications

Tech information

Mechanical Properties


Grade

Thickness
(mm)

Hardness 1) (HBW)

Typical yield strength (MPa), not guaranteed

Hardox 500 sheet

2.0 - 6.5

470 - 530

1400

Hardox 500 plate

4.0 - 32.0

470 - 530

1400

Hardox 500 plate

32.1 - 103.0

450 - 540

1400

1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface. At least one test specimen per heat and 40 tons.
The nominal thickness of supplied plates will not deviate more than +/- 15 mm from the thickness of the test specimen used for hardness testing.

Hardox is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.

Impact Properties


Grade

Longitudinal test, typical impact energy, Charpy V 10x10 mm test specimen.

Hardox 500 sheet & plate 1)

37J / -40°C

1)  Impact toughness measured upon agreement. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. Impact testing according to ISO EN 148 per heat and thickness group. Average of three tests.

Tolerances

Tolerances
More details are given in SSAB’s brochure 41-General Product Information Strenx, Hardox, Armox and Toolox-UK and Hardox® Guarantees or at www.ssab.com.


Thickness
Tolerances according to Hardox Thickness Guarantees. Hardox® Guarantees meet the requirements of EN 10 029 Class A for plate and ½ EN 10 051 for sheet. 


Length and Width
According to SSAB’s dimension program. For plate, the tolerances are according to SSAB´s mill edge standard or tolerances that conform to EN 10 029. Tolerances conform to EN 10 051 for sheet, tighter tolerances available on request. 


Shape
Tolerances according to EN 10 029 for plate and EN 10 051 for sheet.


Flatness
Tolerances according to Hardox® Flatness Guarantees Class D for plate, which are more restrictive than EN 10 029.

For sheet, the tolerances are according to Hardox® Flatness Guarantees Class A, that offer narrower tolerances compared to EN 10 051.


Surface Properties
According to EN 10 163-2, Class A Subclass 1.


Bending
Bendability for plate is according to Hardox Bending Guarantees Class F. For sheet, the bendability is according to Hardox Bending Guarantees Class C.

Chemical Composition
Carbon Equivalent CET(CEV)

Chemical Composition (heat analysis)

Grade

C*)
(max %)

Si*)
(max %)

Mn*)
(max %)

P*)
(max %)

S *)
(max %)

Cr*)
(max %)

Ni*)
(max %)

Mo*)
(max %)

B*)
(max %)

Sheet

0.27

0.50

1.60

0.025

0.010

1.20

0.25

0.25

0.005

Plate

0.30

0.70

1.60

0.025

0.010

1.50

1.50

0.60

0.005

The steel is grain refined. *) Intentional alloying elements.

Carbon Equivalent CET(CEV)

Thickness

sheet
2.0 - 6.5

plate
4.0 - 13.0

plate
13.1 - 19.9

plate
20.0 - 39.9

plate
40.0 - 103.0

Max CET(CEV)

0.38(0.49)

0.38(0.53)

0.43(0.64)

0.45(0.66)

0.47(0.75)

Typ CET(CEV)

0.33(0.45)

0.37(0.51)

0.41(0.63)

0.41(0.63)

0.43(0.72)

Delivery Conditions

The delivery condition is Q or QT (Quenched or Quenched and Tempered). Hardox® 400 plates are delivered with sheared or thermally cut edges and thicknesses over 80 mm are delivered with mill edge as standard. Hardox® 400 sheets are delivered with an as-rolled surface and mill edge as standard.

Delivery requirements can be found in SSAB’s brochure 41-General product information Strenx, Hardox®, Armox and Toolox-UK or at www.ssab.com.

Tech Support

Hardox® Documents to Download

Hardox Downloads

Hardox Steel Grades & Shapes