Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

HARDOX® HiAce

WHEN WEAR MEETS CORROSION

Superior wear life in acidic and corrosive conditions

img-Hardox_HiAce1-600-600-p-L-97

Wear Resistance in Corrosive Environments

Hardox® HiAce is a specialized wear-resistant steel developed for applications where abrasive wear is combined with corrosion. It is designed to provide significantly longer service life in acidic and corrosive environments where conventional abrasion-resistant steels can wear rapidly.

Hardox® HiAce combines the proven toughness and workshop properties of Hardox® wear plate with improved resistance to corrosive-abrasive wear, making it particularly suitable for recycling, waste handling, pulp and paper, biomass and other demanding process industries.

When Abrasion Meets Corrosion

In many industrial applications, abrasion is only part of the wear problem. Moisture, low pH and aggressive chemicals can attack the steel surface and accelerate material loss.

This combination of corrosion and abrasion can result in significantly faster wear than either mechanism acting alone.

Hardox® HiAce is specifically designed for these conditions, providing improved resistance where conventional wear-resistant steels reach their limits.

Why Choose Hardox® HiAce?

Superior Performance in Acidic Environments

Hardox® HiAce is optimized for applications exposed to low-pH and corrosive conditions, where corrosion continuously weakens the surface and accelerates abrasive wear.

Longer Service Life

In suitable corrosive-abrasive environments, Hardox® HiAce can provide significantly longer service life than conventional wear-resistant steels. The actual improvement depends on pH, temperature, abrasive material and operating conditions.

Less Maintenance and Downtime

Longer-lasting wear components mean fewer replacements, reduced maintenance requirements and longer intervals between planned shutdowns.

This can contribute to a significantly lower total cost of ownership.

High Toughness

Hardox® HiAce combines its specialized wear properties with the toughness associated with Hardox® steel, helping components withstand impact, vibration and dynamic loads in demanding operating environments.

Excellent Workshop Properties

Hardox® HiAce is designed for efficient fabrication and can be cut, welded, bent and machined using established workshop methods, making it straightforward to integrate into existing equipment and structures.

More Than Conventional Wear-Resistant Steel

Typical Applications

Hardox® HiAce is particularly suitable for:

•Waste and recycling equipment

•Municipal and industrial waste handling

•Waste containers

•Biomass handling equipment

•Pulp and paper industry

•Wood chip and bark handling

•Process industry equipment

•Chutes and hoppers

•Wear liners

•Components exposed to acidic materials

•Equipment operating in corrosive-abrasive environments

Increasing hardness alone does not always provide the best solution when corrosion is an important part of the wear mechanism.

Hardox® HiAce takes a different approach. It is specifically designed to resist corrosive-abrasive wear, making it an attractive alternative when conventional wear plate experiences accelerated material loss due to acidic or corrosive conditions.

This makes material selection more dependent on the wear environment, rather than simply choosing the highest possible hardness.

Longer Life in Corrosive Wear Conditions

Hardox® HiAce extends the Hardox® concept beyond conventional abrasive wear. By combining wear resistance, corrosion performance, toughness and excellent workshop properties, it provides a specialized solution for environments where abrasion and corrosion work together.

For equipment operators, this can mean longer component life, fewer replacements, reduced downtime and lower maintenance costs.

Choose Hardox® HiAce when abrasion meets corrosion – and conventional wear-resistant steel is no longer enough.


Tech information

Mechanical Properties


Wall Thickness(mm)

Hardness 1) (HBW)

Typical Yield Strength (MPa)
not guaranteed

4.0 - 25.4

425 - 475

1250

1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface. At least one test specimen per heat and 40 tons.
The nominal thickness of supplied plates will not deviate more than +/- 15 mm from the thickness of the test specimen used for hardness testing.

Hardox® plate is through-hardened. The minimum core hardness is 90 % of the guaranteed minimum surface hardness.

Impact Properties


Grade

Transverse test, impact energy, Charpy V 10x10 mm test specimen.

Hardox® HiAce

27 J/ -20

1)Impact testing is performed on thicknesses ≥ 6 mm. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is proportional to the cross-sectional area of the test specimen, compared to a full-size specimen (10 x 10 mm). Impact testing according to ISO EN 148 per heat and thickness group. Average of three tests.

2) Single value minimum 70% of specified average.

Tolerances

Tolerances
More details are given in SSAB’s brochure 41: General Product Information Strenx®, Hardox®, Armox® and Toolox®-UK and Hardox® Guarantees or at www.ssab.com.


Thickness
Tolerances are according to Hardox® Thickness Guarantees. Hardox® Guarantees meet the requirements of EN 10 029 Class A.


Length and Width
Tolerances are according to SSAB’s dimension program. The tolerances are according to SSAB´s mill edge standard or tolerances that conform to EN 10 029.


Shape
Tolerances are according to EN 10 029.


Flatness
Tolerances are according to Hardox Flatness Guarantees Class D, which are more restrictive than EN 10 029.


Surface Properties
According to EN 10 163-2, Class A Subclass 1.


Bending
Bending for Hardox® HiAce are according to Hardox® Bending Guarantees Class E.

Chemical Composition
Carbon Equivalent CET(CEV)

Chemical Composition (heat analysis)

C *)
(max %)

Si *)
(max %)

Mn *)
(max %)

P *)
(max %)

S *)
(max %)

Cr *)
(max %)

Ni *)
(max %)

Mo *)
(max %)

B *)
(max %)

0.26

0.70

1.60

0.025

0.010

5.1

1.5

0.60

0.005

The steel is grain refined. *) Intentional alloying elements.

Carbon Equivalent CET(CEV)

Wall Thickness
(mm)

4.0 - 25.4

Max CET(CEV)

0.41(1.03)

Typ CET(CEV)

0.38(0.99)

Delivery Conditions

Order & delivery
The delivery condition is Q or QT (Quenched or Quenched and Tempered). Hardox® HiAce is delivered with sheared or thermally cut edges.

Delivery requirements can be found in SSAB’s brochure 41: General product information Strenx, Hardox, Armox and Toolox®-UK or at www.ssab.com.

Tech Support

Hardox® Documents to Download

Hardox Downloads

Hardox Steel Grades & Shapes