Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

HARDOX® 600

EXTREME HARDNESS. BUILT TOUGH

Tool steel hardness with exceptional toughness

Hardox 600

Extreme Hardness for Maximum Wear Resistance

Hardox® 600 is an extra-hard wear-resistant steel designed for applications where extreme abrasion demands maximum wear resistance and exceptionally long service life. With a nominal hardness of 600 HBW, it represents one of the hardest grades in the Hardox® wear plate range.

What makes Hardox® 600 particularly interesting is its combination of extreme hardness and high toughness. This allows it to replace conventional wear steels and, in selected applications, even traditional tool steels where both wear resistance and resistance to cracking or chipping are critical.

Extreme Hardness. High Toughness.

The main advantage of Hardox® 600 is its 600 HBW nominal hardness, providing outstanding resistance to sliding and abrasive wear.

Unlike many conventional steels at a similar hardness level, Hardox® 600 combines very high hardness with excellent toughness. This reduces the risk of premature cracking and chipping in components exposed to wear, impact and dynamic loads.

Why Upgrade to Hardox® 600?

Maximum Wear Resistance

With a nominal hardness of 600 HBW, Hardox® 600 provides a major increase in abrasion resistance compared with lower-hardness wear steels. This makes it suitable for applications where maximizing component service life is the main priority.

Longer Service Life

The higher hardness can significantly extend wear life in highly abrasive environments, reducing replacement frequency and increasing equipment availability.

High Toughness at Extreme Hardness

One of the key advantages of Hardox® 600 is its high toughness despite its extreme hardness. This provides improved resistance to cracking and chipping compared with more brittle materials of similar hardness.

Alternative to Conventional Tool Steels

In selected applications, Hardox® 600 can be used as an alternative to conventional hardened tool steels.

Because Hardox® 600 is supplied through-hardened and ready to use, components can be manufactured directly from plate without additional hardening. This can simplify production, shorten lead times and eliminate the risk of distortion associated with heat treatment.

Lower Maintenance and Production Costs

Longer wear life means fewer replacement parts and less maintenance. Eliminating additional heat treatment in suitable applications can further reduce manufacturing time and overall component costs.

Typical Applications

Hardox® 600 is particularly suitable for:

•Shredder knives and blades

•Recycling equipment

•Wear liners

•Crusher components

•Cutting and wear edges

•Screens and highly abrasive components

•Mining and quarrying equipment

•Heavy-duty wear parts

•Components traditionally manufactured from hardened tool steel

Wear Steel and Tool Steel in One Solution

Hardox® 600 bridges the gap between traditional wear-resistant steels and hardened tool steels.

Its combination of extreme hardness, wear resistance and toughness makes it particularly attractive for components exposed to severe abrasion combined with impact and dynamic loading.

For suitable parts, the production process can also be simplified: components are cut from plate and finish-machined without the need for subsequent hardening.

Maximum Wear Life. Simplified Production.

Hardox® 600 combines 600 HBW hardness with high toughness and exceptional wear resistance, providing a high-performance solution for some of the most demanding wear applications.

For selected components traditionally produced from tool steel, its through-hardened delivery condition can also mean fewer manufacturing steps, no additional hardening, shorter lead times and reduced risk of heat-treatment distortion.

Choose Hardox® 600 when extreme wear requires maxim ardness, high toughness and exceptionally long component life

Applications

Tech information

Mechanical Properties


Grade

Thickness
(mm)

Hardness 1) (HBW)

Hardox 600 sheet

3.0 - 5-0

570 - 640

Hardox 600 plate

6.0 - 51.0

570 - 640

Hardox 600 plate

51.1 - 65.0

550 - 640

1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface for plate. At least one test specimen per heat and 40 tons. The nominal material thickness will not deviate more than ± 15 mm from that of the test specimen. For sheet the Brinell hardness test´is according to EN ISO 6506-1 on each heat treatment individual/coil. Hardness is measured on a milled surface 0.3 - 2 mm below surface.

Hardox is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.

Tolerances

Tolerances
More details are given in SSAB´s brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK and Hardox Guarantees or on www.ssab.com.


Thickness
Tolerances according to Hardox Thickness Guarantees. Hardox® Guarantees meets the requirements of EN 10 029 Class A, but offers more narrow
tolerances. For sheet, the guarantees meet the requirements of 1/2 EN 10 051.


Length and Width
According to SSAB’s dimensions program. Tolerances conforms to EN 10 029 or to SSAB’s standard after agreement. For sheet the tolerances are according to EN 10 051 or to SSAB´s standard after agreement.


Shape
Tolerances according to EN 10 029 for plate, EN 10 051 for sheet.


Flatness
Tolerances according to Hardox Flatness Guarantee class E, which are more restrictive than EN 10 029 Class N. For sheet, the tolerances are
according to Hardox Flatness Guarantees Class A, which are more restrictive than EN 10 051.


Surface Properties
According to EN 10163-2 Class A Subclass 1.

Chemical Composition
Carbon Equivalent CET(CEV)

Chemical Composition (heat analysis)

Grade

C *)
(max %)

Si *)
(max %)

Mn *)
(max %)

P *)
(max %)

S *)
(max %)

Cr *)
(max %)

Ni *)
(max %)

Mo *)
(max %)

B *)
(max %)

Hardox 600 sheet

0.40

0.50

1.0

0.015

0.010

1.20

1.50

0.60

-

Hardox 600 plate

0.47

0.70

1.5

0.015

0.010

1.20

2.50

0.70

0.005

The steel is grain refined. *) Intentional alloying elements.

Carbon Equivalent CET(CEV)

Thickness

Hardox® 600 sheet
3.0 - 5.0

Hardox® 600 plate
6.0 - 35.0

Hardox® 600 plate
35.1 - 65.0

Max CET(CEV)

0.52(0.72)

0.57(0.69)

0.61(0.87)

Typ CET(CEV)

0.48(0.64)

0.55(0.66)

0.59(0.85)

Delivery Conditions

The delivery condition is Quenched. The plates are delivered with sheared or thermally cut edges, untrimmed mill edges available by agreement. Cut to length sheet are delivered with an as-rolled surface and mill edges as standard delivery condition.

Delivery requirements can be found in SSAB’s brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK or at www.ssab.com.

Tech Support

Hardox® Documents to Download

Hardox Downloads

Hardox Steel Grades & Shapes