Duroxite 300

Duroxite 300
Duroxite 300 is an iron-based steel alloy overlay deposited on mild steel. It is designed for extremely severe sliding wear for both dry and wet (slurry) abrasive environments. The overlay contains a unique high volume of ultra-fine borocarbides with a grain size refined down to 500 nm. The borocarbides are completely wetted in a ductile matrix resulting in a product with significantly improved service life that maintains high toughness in extreme sliding wear applications. Duroxite 300 is an excellent alternative to tungsten carbide overlay.
Key benefits
- Cost effective alternative to tungsten carbide with equivalent service life and better impact resistance
- Overlay thickness is reduced compared to traditional overlays resulting in a lighter weight product while increasing service life
- Absorbs 25% more impact energy than the traditional chromium overlay plate as measured by the continuous high impact lab test
- Has uniform through-thickness hardness of 67 to 70 HRC for single and multiple-layer overlay. Maintains a high hardness of approximately 60 HRC after exposure to high temperatures up to 1100°F (600°C)
- Maintains a consistent wear resistance from surface down to 75% of the overlay
Typical Applications
Duroxite 300 is suitable for use in industries such as mining, cement, oil sands, steel production and several others. Some specific applications include:
- Mining: Crusher rolls, skip liners, slurry pipes and pumps, conveyor chains, excavator bucket liners
- Cement: Fan blades, deflector blades, cranker crushers
- Oil Sands: Surge bins, feed chutes, slurry pipes and pumps
- Steel: Ore chutes
- Power: Screw augers, wear liner plates, ash handling equipment liners
- Agriculture: Grain shedding hammers, sugar mill knives, row crop sweeps
- Oil and Gas: Fracking blender pumps
- Construction: Snowplow shoes, demolition tools
Tech information
Mechanical Properties
Surface Hardness
Number of overlay passes | Typical surface hardness 1) |
|---|---|
Single and double pass | 67 to 70 HRC (925 to 1075 HV) |
1)Surface hardness is measured on machined flat surface just below overlay surface.
Wear Propertie
Number of overlay passes | ASTM G65 - Procefure A weight loss 2) | |
|---|---|---|
Surface | 75% depth of overlay 3) | |
Single pass | 0.10 g maximum | 0.10 g maximum |
Double pass | 0.07 g maximum | 0.07 g maximum |
2)ASTM G65 is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. ASTM G65-Procedure A is the most severe test method.
3)ASTM G65 wear test is conducted at 75% depth of the overlay materials to ensure consistently good wear resistance from the top surface through to the depth of 75% of the overlay
Standard Dimensions
Standard overlay thickness | Standard plate sizes | ||||
|---|---|---|---|---|---|
Single pass | Multiple passes | ||||
Metric unit | Imperial unit | Metric unit | Imperial unit | Metric unit | Imperial unit |
3 mm on 6 mm | 1/8˝ on 1/4˝ | 6 mm on 6 mm | 1/4˝ on 1/4˝ | ||
6 mm on 8 mm | 1/4˝ on 5/16˝ | 1.2 m x 2.4 m | 4' x 8' | ||
6 mm on 10 mm | 1/4˝ on 3/8˝ | 1.5 m x 3.0 m | 5' x 10' | ||
10 mm on 12 mm | 1/4˝ on 1/2˝ | 1.8 m x 3.0 m | 6' x 10' |
Tolerances
Thickness
Overall and overlay thickness tolerances can be guaranteed within ±10% of specified thickness.
Flatness
Plate flatness tolerance can be guaranteed within ±3 mm (±1/8”) over 1.5 m (5’) plate length for plate dimensions equal to or less than 1.5 m (5’) x 3.0 m (10’). For plates greater than 1.5 m (5’) wide by 3.0 m (10’) long, the plate flatness tolerance can be guaranteed within ±25 mm (±1”).
Delivery Conditions
Duroxite 300 is supplied in an as-welded condition.




