Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

Duroxite® 100

img-duroxite_100_wire-600-600-p-L-97.jpg

High-Performance Hardfacing for Severe Wear

Duroxite® 100 Wire is a flux-cored welding wire developed for hardfacing components exposed to severe sliding wear and moderate to low impact.

Applied using an open-arc welding process, Duroxite® 100 Wire creates a highly wear-resistant overlay directly on critical component surfaces. It is suitable for single- or multi-layer deposits up to a maximum of three layers, making it an efficient solution for both new wear parts and the rebuilding of worn components.

Engineered for Severe Abrasive Wear

The performance of Duroxite® 100 Wire is based on an optimized alloy formulation that creates a highly wear-resistant carbide structure with reliable and homogeneous bonding.

An important advantage is its consistent wear performance. In multi-layer deposits, the same wear resistance is guaranteed from the surface down to 75% of the overlay depth, providing predictable protection throughout most of the hardfaced layer.

Why Choose Duroxite® 100?

•Flux-cored welding wire for wear-resistant hardfacing

•Designed for severe sliding wear

•Suitable for moderate to low impact applications

•Applied using an open-arc welding process

•Suitable for single- or multi-layer deposits up to three layers

•Consistent wear resistance from the surface down to 75% of the overlay depth in multi-layer deposits

•Optimized alloy formulation for high wear resistance and homogeneous bonding

•Excellent resistance to wear caused by earth, sand and other abrasive materials

•Suitable for applications at temperatures up to 350°C

Typical Applications

Duroxite® 100 Wire is particularly suitable for components exposed to earth, sand and other abrasive materials.

Typical applications include:

•Crusher hammers

•Gyratory crusher cones and mantles

•Dredge pumps

•Slurry pipes

•Dragline bucket liners

•Coal pulverizer rolls

•Coke hammers

•Sand dredging components

•Mining and earthmoving equipment

•Sorting screens

Hardfacing Where Protection Is Needed

Duroxite® 100 Wire allows wear protection to be applied directly to the areas of a component exposed to the highest abrasion.

This makes it particularly suitable for hardfacing new components as well as rebuilding worn parts, extending their useful life without necessarily replacing the complete component.

Key advantages include:

•Targeted protection of critical wear areas

•Longer component service life

•Rebuilding of worn components

•Reduced replacement frequency

•Longer maintenance intervals

•Less equipment downtime

Longer Service Life Through Hardfacing

Duroxite® 100 Wire provides an efficient way to protect, rebuild and extend the service life of wear-critical components.

Its combination of high wear resistance, consistent overlay performance and flexible multi-layer application makes it an effective solution for equipment operating under severe abrasive conditions.

Damatech supplies Duroxite® 100 Wire together with technical support, helping customers select the appropriate hardfacing solution for their specific wear conditions.

Duroxite® 100 Wire – targeted hardfacing protection for severe abrasive wear.

Tech information

Mechanical Properties

Classificartions


DIN 14700 T Fe15 G

 DIN 8555 MF 10 GF 60 G

Typical all-weld metal chemical composition (wt. %)

C

Mn

Si

Cr

Fe

4.7

0.2

0.6

27.0

Balance

Typical all-weld metal surface hardness 2)

Three-layer deposit on mid steel: 60-62 HRC

Standard Dimensions


 Standard Diameter

Metric

Imperial


1.6mm

1/16"

Delivery Conditions


Standard
package

Diameter

 

Type

Weight

 

 

 Metric

Imperial

 

Metric

Imperial

 

 1.6mm

 1/16"

 Spool

 15kg

 33 lb

Tech Support

Duroxite® Documents to Download

Duroxite Downloads

Duroxite Steel Grades & Shapes