Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

DUROXITE® 100

BUILT TO FIGHT ABRASIVE WEAR

Proven protection for longer wear life

img-1_4_1_1_Duroxite_100_1-600-600-p-L-97.jpg

High-Performance Chromium Carbide Overlay Plate

Duroxite® 100 is a high-performance chromium carbide overlay plate designed for applications exposed to severe abrasive wear and moderate to low impact. It is manufactured by depositing chromium-rich, abrasion-resistant material onto a mild steel base plate using an arc welding process. The result combines a highly wear-resistant surface with a tough and weldable base plate, providing reliable performance in demanding industrial environments.

Engineered for Severe Abrasion

The wear performance of Duroxite 100 comes from its chromium-rich carbide overlay. Hard carbides distributed throughout the overlay provide excellent resistance against abrasive materials such as rock, minerals, sand, clinker and coal.

Unlike solutions where wear resistance is concentrated mainly at the surface, Duroxite 100 provides consistent wear properties down to 75% of the overlay thickness, ensuring predictable performance throughout most of its service life.

Why Choose Duroxite® 100?

•Excellent resistance to severe abrasive wear

•Suitable for moderate to low impact applications

•Chromium-rich carbide overlay on a mild steel base plate

•Consistent wear resistance from the surface down to 75% of the overlay thickness

•Optimized carbide composition for high wear resistance and homogeneous bonding

•Good formability due to the staggered cracking pattern

•Maintains full wear resistance up to 350°C

•Typical surface hardness of approximately 55 HRC at temperatures up to 540°C

•Available in single or multiple layers with overlay thicknesses up to 20 mm

Typical Applications

Duroxite® 100 is widely used in mining, cement production, dredging, steel production, power generation, waste handling, glass production, and pulp and paper industries.

Typical applications include:

•Chutes and hoppers

•Truck bed liners

•Dozer blades and excavator components

•Shovel and dragline buckets

•Separator guide vanes

•Clinker handling equipment

•Dredging pipes and pumps

•Fan blades and housings

•Vibrating screen plates

•Coal feeder liners

•Crusher screen plates

•Silo and bunker liners

Wear Protection Where It Matters

Duroxite® 100 concentrates wear protection exactly where abrasion occurs. The chromium carbide overlay provides wear resistance, while the mild steel base plate provides structural support and facilitates fabrication and installation.

This makes Duroxite® 100 an efficient solution for liners, chutes, hoppers, truck bodies and material-handling equipment.

Key advantages include:

•Longer component service life

•Longer maintenance intervals

•Reduced replacement frequency

•Less equipment downtime

•Targeted protection of critical wear areas

•Potentially lower total operating costs

Longer Service Life. Less Maintenance. More Uptime.

Duroxite® 100 combines high wear resistance, predictable performance and practical fabrication possibilities to protect equipment operating in severe abrasive conditions.

By extending the service life of critical wear components, it can help reduce maintenance requirements, minimize downtime and improve equipment availability.

Damatech supplies Duroxite® 100 plates together with value-added processing services and technical support, helping customers select the right plate configuration and transform it into application-specific wear parts.

Duroxite® 100 – engineered for severe abrasion and longer service life.

Tech information

Mechanical Properties

Surface Hardness


Number of overlay passes

Typical surface hardness 1)
(mm)

Single pass

55 to 57 HRC (590 to 630 HV)

Double passes

59 to 62 HRC (675 to 750 HV)

Triple and more passes

60 to 64 HRC (700 to 810 HV)

1)Surface hardness is measured on machined flat surface just below overlay surface.

Wear Propertie


Number of overlay passes

ASTM G65 - Procefure A weight loss 2)



Surface

75% depth of overlay 3)

Single pass

0.25 g maximum

0.25 g maximum

Multiple passes

0.18 g maximum

0.18 g maximum

2)ASTM G65 is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. ASTM G65-Procedure A is the most severe test method.

3)ASTM G65 wear test is conducted at 75% depth of the overlay materials to ensure consistently good wear resistance from the top surface through to the depth of 75% of the overlay

Standard Dimensions
stand dimen.png
Tolerances
tolerances.png

Thickness

Overall and overlay thickness tolerances can be guaranteed within +10% of specified thickness.

Flatness

Plate flatness tolerance can be guaranteed within ±3 mm (±1/8”) over 1.5 m (5’) plate length for plate dimensions equal to or less than 1.5 m (5’) x 3.0 m (10’). For plates greater than 1.5 m (5’) wide by 3.0 m (10’) long, the following flatness guarantees apply.

For custom sizes, please consult your local sales representative or Hardox Wearparts center for flatness guarantees.

Delivery Conditions

Duroxite® 100 is normally supplied in an as-welded condition, but can also be supplied in a ground condition upon request.

Tech Support

Duroxite® Documents to Download

Duroxite Downloads

Duroxite Steel Grades & Shapes