Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

DUROXITE® 200

TAKE WEAR PROTECTION FURTHER

Multi-layer protection for extreme abrasive wear

img-Duroxite_200-600-600-p-L-97.jpg

Advanced Wear Protection for Extreme Conditions

Duroxite® 200 is a high-performance overlay plate developed for applications exposed to extremely severe abrasive wear and high to moderate impact.

It consists of specially formulated wear-resistant materials deposited onto a mild steel backing plate. The overlay contains chromium-rich carbides combined with refined multiple-alloy complex carbides, evenly distributed in a ductile eutectic austenitic matrix.

This advanced carbide structure provides superior wear resistance compared with traditional chromium carbide overlay plates.

Why Choose Duroxite® 200?

•Designed for extremely severe abrasive wear

•Suitable for high to moderate impact applications

•Chromium-rich and multiple-alloy complex carbide structure

•Finer and harder complex carbides for enhanced wear resistance

•Tough mild steel backing plate

•Longer service life compared with traditional chromium carbide overlay plates

•Available in single- and double-layer versions

•Double-layer overlay maintains full wear resistance up to 600°C

•Suitable for demanding industrial wear applications

Typical Applications

Duroxite® 200 is widely used in demanding industries including mining, cement production and steel production.

Typical applications include:

Mining

•Chutes and liner plates

•Conveyor sides

•Underground mine skips

Cement

•Cement furnace components

•Sinter plant components

•Fan and mixer blades

•Screws

•Gyratory mantles

•Coal and cement pulverizer rolls

•Raw material crushing components

•Moulding panels

Steel

•Ore sintering equipment

•Crushing and screening equipment

•Blast furnace hoppers

•Blast furnace throats

•Furnace components

Advanced Carbide Technology for Extreme Wear

The outstanding wear resistance of Duroxite® 200 comes from its advanced combination of primary chromium-rich carbides and refined multiple-alloy complex carbides.

The complex carbides are harder and finer than conventional chromium carbides. They interlock between the primary carbides, creating a dense and highly wear-resistant structure.

This makes Duroxite® 200 particularly suitable for applications where extreme abrasion is combined with impact and demanding operating conditions.

Duroxite® 200 vs. Traditional Overlay Plates

Duroxite® 200 takes wear protection beyond traditional chromium carbide overlay technology.

Its multiple-alloy carbide structure provides higher wear resistance and longer service life, making it particularly effective for critical components exposed to intensive abrasion.

Key advantages include:

•Superior resistance to extreme abrasive wear

•Improved performance under impact

•Longer component service life

•Reduced replacement frequency

•Longer maintenance intervals

•Less equipment downtime

•Excellent performance at elevated temperatures

Longer Service Life in Extreme Conditions

Duroxite® 200 combines advanced carbide technology, extreme wear resistance and impact capability to protect equipment operating under some of the most demanding wear conditions.

Its enhanced wear performance can help extend maintenance intervals, reduce component replacement and minimize production downtime.

Damatech supplies Duroxite® 200 plates together with value-added processing services and technical support, helping customers select the right configuration and develop application-specific wear parts.

Duroxite® 200 – advanced protection for extreme wear conditions.

Applications

Tech information

Mechanical Properties

Surface Hardness


Number of overlay passes

Typical surface hardness 1)
(mm)

Single pass

57 to 60 HRC (630 to 700 HV)

Double passes

60 to 65 HRC (700 to 850 HV)

1)Surface hardness is measured on machined flat surface just below overlay surface.

Wear Propertie


Number of overlay passes

ASTM G65 - Procefure A weight loss 2)



Surface

75% depth of overlay 3)

Single pass

0.19 g maximum

0.19 g maximum

Multiple passes

0.12 g maximum

0.12 g maximum

2)ASTM G65 is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. ASTM G65-Procedure A is the most severe test method.

3)ASTM G65 wear test is conducted at 75% depth of the overlay materials to ensure consistently good wear resistance from the top surface through to the depth of 75% of the overlay

Standard Dimensions


Standard overlay thickness


Standard plate sizes




 Single pass


Multiple passes




Metric unit

Imperial unit

Metric unit

Imperial unit

Metric unit

Imperial unit

3 mm on 6 mm

1/8˝ on 1/4˝

6 mm on 6 mm

1/4˝ on 1/4˝





6 mm on 10 mm

1/4˝ on 3/8˝

1.2 m x 2.4m
1.5 m x 3.0 m
1.8 m x 3.0 m
2.4 m x 3.0 m

4’ x 8’
5’ x 10’
6’ x 10’
8’ x 10’



10 mm on 10 mm

1/4˝ on 3/8˝






3/8˝ on 3/8˝



Other plate sizes and custom thicknesses can be produced upon request.

Tolerances

Thickness

Overall and overlay thickness tolerances can be guaranteed within +10% of specified thickness.

Flatness

Plate flatness tolerance can be guaranteed within ±3 mm (±1/8”) over 1.5 m (5’) plate length for plate dimensions equal to or less than 1.5 m (5’) x 3.0 m (10’). For plates greater than 1.5 m (5’) wide by 3.0 m (10’) long, the following flatness guarantees apply.


Standard overlay thickness


Flatness tolerance over 1.5 m (5´) plate tength
Metric unit (Imperial unit)






1.8 m x 3.0 m (6´x 10´)


1.8 m x 3.0 m (6´x 10´)


Metric unit

Imperial unit

Metric unit

Imperial unit

Metric unit

Imperial unit

5 mm on 7 mm

3/16˝ on 5/16˝

25 mm

1˝

41 mm

1-5/8˝

6 mm on 6 mm

1/4˝ on 1/4˝

25 mm

1˝

Not available

 

10 mm on 10 mm

3/8˝ on 3/8˝

12 mm

1/2˝

25 mm

1˝

12 mm on 12 mm

1/2˝ on 1/2˝

6 mm

1/4˝

16 mm

5/8˝

For custom sizes, please consult your local sales representative or Hardox Wearparts center for flatness guarantees.

Tech Support

Duroxite® Documents to Download

Duroxite Downloads

Duroxite Steel Grades & Shapes