Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

Duroxite® 200

img-Duroxite_200_wire-600-600-p-L-97.jpg

Advanced Hardfacing for Extreme Wear

Duroxite® 200 Wire is a high-performance hardfacing wire developed for applications exposed to severe abrasive wear, moderate impact and operating temperatures up to 600°C.

The overlay combines primary chromium-rich carbides with refined multiple-alloy carbides, providing an excellent combination of wear and impact resistance. Duroxite 200 Wire is particularly suitable for capping, routine maintenance and repair of components operating under demanding wear conditions.

Advanced Carbide Technology for Extreme Wear

The exceptional performance of Duroxite® 200 Wire comes from its combination of primary chromium-rich carbides and refined multiple-alloy carbides.

Why Choose Duroxite® 200?

•Designed for severe abrasive wear and moderate impact

•Suitable for operating temperatures up to 600°C (1100°F)

•Chromium-rich and multiple-alloy carbide structure

•Consistent wear resistance from the surface down to 75% of the overlay depth in multi-layer deposits

•Provides up to 4 times longer service life than Duroxite® 100 due to its high proportion of extremely hard multiple-alloy carbides

•Suitable for mild steel, Q&T steels, cast materials and stainless steel

•Suitable for capping, maintenance and repair

•Easy to apply both on site and in the workshop

•Suitable for all-position welding, including overhead applications

Typical Applications

Duroxite® 200 Wire is particularly suitable for demanding mining, earthmoving, crushing and high-temperature applications.

Typical applications include:

•Buckets and teeth

•Railway ballast tampers

•Dredge buckets and lips

•Dragline buckets

•Coke hammers and rippers

•Sizing screens

•Crushing equipment

•Brick industry components

•Muller tires

•Catalyst lift pipes

•Pump impellers

•Fan blades

•Rockwool rolls

•High-temperature wear parts in the steel industry


These extremely hard complex carbides provide enhanced resistance to severe abrasion while maintaining good impact resistance. This advanced carbide structure can provide up to four times longer service life compared with Duroxite® 100 in suitable applications.

In multi-layer deposits, consistent wear resistance is guaranteed from the surface down to 75% of the overlay depth, providing predictable wear performance throughout most of the hardfaced layer.

Flexible Hardfacing and Repair

Duroxite® 200 Wire can be welded onto mild steel, quenched and tempered (Q&T) steels, cast materials and stainless steel, providing considerable flexibility for maintenance and repair applications.

It can be applied quickly both in the workshop and directly on site. Its all-position welding capability, including overhead welding, makes it particularly practical for repairing large or difficult-to-remove components.

Key advantages include:

•Longer component service life

•Repair and rebuilding of worn components

•Targeted protection of critical wear areas

•Reduced replacement frequency

•Longer maintenance intervals

•Less equipment downtime

•Excellent flexibility for on-site repairs

Longer Service Life in Extreme Conditions

Duroxite® 200 Wire combines advanced multiple-alloy carbide technology, excellent wear resistance and flexible application for components operating under severe abrasive conditions.

Its ability to withstand abrasion, impact and elevated temperatures makes it an effective solution for protecting, rebuilding and extending the service life of critical wear components.

Damatech supplies Duroxite® 200 Wire together with technical support, helping customers select the appropriate hardfacing solution for their specific wear conditions and applications.

Duroxite® 200 Wire – advanced hardfacing for extreme wear and longer service life.

Tech information

Mechanical Properties

Classificartions


DIN 8555: MF 10-GF-65-GRT

Typical all-weld metal chemical composition (wt. %)

C

Mn

Si

Cr

Nb

Fe

5.3

0.5

0.2

22.0

6.5

Balance

Typical all-weld metal surface hardness 1)

Three-layer deposit on mild steel: 62-67 HRC

1)Surface hardness is measured on machined flat surface just below overlay surface.



Typical all-weld metal
surface hardness

 Rockwell C
hardness (HRC)

 Single pass

57-60 HRC

 Double pass

 60-65 HRC


Standard Dimensions


 Strandard Diameter

Metric

Imperial

 

 1.2mm

0.045"

 

 1.6mm

 1/16"

 

 2.8mm

 7/64"

Delivery Conditions


Standard
package

Diameter

 

Weight

 

 

 Type

Metric

Imperial

 Metric 

Imperial

Imperial

 Spool

1.2mm

0.045"

15kg

33 lbs

 33 lb

 Spool

1.6mm

1/16"

15kg

33 lbs


Spool

2.8mm

7/64"

23kg

55lbs


Tech Support

Duroxite® Documents to Download

Duroxite Downloads

Duroxite Steel Grades & Shapes