Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

TOOLOX® 46 Round Bars

HIGHER HARDNESS. READY TO MACHINE

Premium performance for demanding components

Toolox 46 Round bars

High-Hardness Prehardened Round Bars

Toolox® 46 Round Bars are high-performance, prehardened tool steel bars developed for demanding applications where high hardness, wear resistance, toughness and dimensional stability are essential. With a typical hardness of approximately 46 HRC, Toolox® 46 combines excellent wear resistance with the toughness and reliability characteristic of the Toolox® concept.

Supplied in round-bar form and ready for machining, Toolox® 46 is particularly suitable for cylindrical components and tools where manufacturers want to reduce machining time, material waste and additional heat-treatment operations.

Toolox® 46 vs. Conventional Tool Steels

Toolox® 46 Round Bars provide an attractive alternative to conventional tool steels such as 1.2343 (H11) and 1.2344 (H13) for many demanding applications.

Conventional tool steels typically require machining in the soft condition followed by hardening, tempering and final machining. Toolox® 46 is supplied prehardened and ready to use, allowing additional hardening to be eliminated in many applications.

This can provide several advantages:

•Fewer manufacturing steps

•Shorter production lead times

•Reduced risk of heat-treatment distortion

•High wear resistance

•Excellent toughness at a high hardness level

•Very good vibration damping

•More predictable manufacturing costs

•Advantages of Round Bars

Why Choose Toolox®46 Round Bars?

•Prehardened and ready for machining

•Typical hardness of approximately 46 HRC

•High wear resistance combined with excellent toughness

•Excellent dimensional stability

•Very good vibration damping properties

•High resistance to mechanical and thermal loads

•Good wear resistance at elevated temperatures

•Suitable for nitriding and other surface treatments

•Consistent and reliable mechanical properties

Typical Applications

Toolox® 46 Round Bars are particularly suitable for:

•Tool holders

•Shafts and pins

•Rollers

•Bushings and sleeves

•Extrusion tooling

•Forging and forming tools

•Highly loaded machine components

•Wear-resistant cylindrical components

•Components operating at elevated temperatures

•Parts exposed to vibration and dynamic loads

The round-bar format is particularly efficient for manufacturing cylindrical and rotationally symmetrical components. Starting with a round bar instead of a plate can significantly reduce material removal, machining time and material waste.

Combined with the prehardened condition of Toolox® 46, this enables manufacturers to move more quickly from raw material to a finished component.

Tool Steel and Wear-Resistant Steel

Toolox® 46 Round Bars can be used both as a high-performance tool steel and as a wear-resistant engineering steel.

Their combination of high hardness, toughness, thermal stability and vibration damping makes them particularly suitable for components exposed to wear, impact, vibration and elevated operating temperatures.

Efficient Production and Longer Service Life

Toolox® 46 Round Bars combine the advantages of a high-hardness prehardened tool steel with an efficient round-bar format. This can reduce machining, eliminate additional hardening in many applications and minimize the risk of dimensional changes during production. The result is shorter lead times, efficient material utilization, high wear resistance and the potential for longer component and tool life.

Damatech supplies Toolox® 46 Round Bars together with processing services and technical support, helping customers select the right dimensions and optimize the complete manufacturing process.


Tech information

Mechanical Properties


Diameter
(mm)

Hardness 1)
(HBW)

151 - 353

430 - 490

Bar Hardness is measured on a milled surface, with indents positioned as impact test according to EN 10 083.

Impact Properties


Test temperature

Min. Impact Energy for Charpy-V, longitudinal direction

142 - 172

10 J / 20°C

Impact testing according to EN 10 025, EN ISO 148 with a 2 mm striker.

Ultrasonic testing

Ultrasonic inspection is carried out according to: EN 10160 for plate, EN 10228-3 for forged blocks and EN 10308 for round bars . All of them with extra demands according to specification SSAB V6.

Tolerances

Tolerances
Tolerances for Toolox 46 round bars are according to EN 10 060.

For more information concerning dimensions and tolerances, see Toolox round bars dimensional program: Toolox engineering & tool steel dimensional program bars available at www.ssab.com or www.toolox.com.

Delivery Conditions

Order & delivery

Quenched and Tempered at a minimum temperature of 590 °C.

On delivery from SSAB the plates meet the following specifications:

  • free from mill scale
  • not repair welded

Delivery requirements can be found in SSAB’s brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK or www.toolox.com.

Tech Support

Toolox® Documents to Download

Toolox Downloads

Toolox® Steel Grades & Shapes