TOOLOX® 33
MACHINE IT. TRUST IT. USE IT
Pre-hardened steel for stable and precise machining

Prehardened Engineering and Tool Steel
Toolox® 33 is a high-performance, prehardened engineering and tool steel designed for applications where strength, toughness, machinability and dimensional stability are essential. It is supplied quenched and tempered, stress-relieved and ready for machining, with tested and guaranteed mechanical properties.
Toolox® 33 is an excellent alternative to conventional steel grades such as 1.2312, 1.2311 and 42CrMo4 QT, particularly for applications where dimensional stability, consistent properties and efficient machining are important.
Why Choose Toolox®33?
•Prehardened, stress-relieved and ready for machining
•Typical hardness of approximately 300 HB
•Excellent dimensional stability and low residual stresses
•High toughness and fatigue resistance
•Excellent machinability
•Good polishing and surface texturing properties
•Consistent and guaranted mechanical properties throughout the material
Typical Applications
Toolox 33 is widely used for:
•Standard mold plates and mold bases
•Plastic injection mold components
•Machine frames and bases
•Precision machine components
•Tool holders and fixtures
•Highly machined structural components

Reduce Production Time and Costs
The advantages of Toolox 33 extend beyond its mechanical properties. Excellent dimensional stability and low residual stresses can simplify machining, reduce corrective operations and shorten production lead times.

For components traditionally manufactured from 1.2312, 1.2311 or 42CrMo4 QT, Toolox 33 provides a reliable solution for achieving higher dimensional accuracy, efficient machining and lower overall production costs.
Damatech supplies Toolox 33 together with processing services and technical support, helping customers optimize material selection and the complete manufacturing process.
Toolox 33 vs. 1.2312 and 1.2311
Conventional prehardened mold steels such as 1.2312 and 1.2311 are widely used for mold plates and general engineering components. Toolox 33 offers important advantages where precision and dimensional stability are critical.
Its low residual stresses help reduce deformation during machining, particularly when large amounts of material are removed. This makes it easier to achieve tight tolerances and good flatness while reducing the need for corrective machining or intermediate stress-relief operations.
Compared with conventional 1.2312 and 1.2311 steels, Toolox 33 offers:
•Better dimensional stability
•Lower risk of distortion during machining
•Low residual stresses
•Excellent machinability
•Consistent mechanical properties•
Toolox 33 vs. 42CrMo4 QT
42CrMo4 QT is widely used for mechanically loaded machine components. Toolox 33 provides an attractive alternative for applications requiring extensive machining and high dimensional accuracy.
Its controlled residual stresses and consistent properties provide more predictable machining behavior and reduce the risk of deformation.
Applications
Tech information
Mechanical Properties
Thickness | Hardness 1) |
|---|---|
6 - 130 | 275 - 325 |
1) Hardness is measured, according to EN ISO 6506-1, on a milled surface 0.5 - 2 mm below the plate surface.
Impact Properties
Test temperature | Impact energy, Charpy-V, Min J 2) |
|---|---|
20°C | 20 |
2) Impact testing according to EN 10 025, EN ISO 148 with a 2 mm striker.
Ultrasonic testing
Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.
Tolerances
Tolerances
More details are given in SSAB’s brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK and also available on www.toolox.com.
Thickness
Tolerances according to SSAB’s thickness guarantee AccuRollTech. AccuRollTech meets the requirements of EN 10 029 Class C but offers more narrow tolerances.
Length and Width
Tolerances according to EN 10 029.
Flatness
Flatness tolerances are according to SSAB’s flatness tolerances, which are more restrictive than EN 10 029 Class N (steel type L).
Surface Properties
Surface properties of Toolox 33 are according to EN 10 163-2 Class B, Subclass 3.
Chemical Composition

Chemical composition
Delivery Conditions
Order & delivery
Quenched and Tempered at a minimum temperature of 590 °C.
On delivery from SSAB the plates meet the following specifications:
- free from mill scale
- not repair welded
Delivery requirements can be found in SSAB’s brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK or www.toolox.com.





