Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

TOOLOX® 44

HIGH HARDNESS. READY TO PERFORM

Pre-hardened steel for demanding tools and components

Toolox 44 Main

Prehardened Tool Steel

Toolox® 44 is a high-performance, prehardened tool steel designed for demanding applications where high hardness, toughness, wear resistance and dimensional stability are essential. It is supplied quenched and tempered, stress-relieved and ready for machining, with tested and guaranteed mechanical properties.

Toolox 44 is an excellent alternative to conventional hot-work tool steels such as 1.2343 (H11) and 1.2344 (H13), particularly when shorter production times, reduced heat-treatment requirements and dimensional stability are important.

Toolox® 44 vs. 1.2343 and 1.2344

Conventional hot-work tool steels such as 1.2343 and 1.2344 typically require machining in the soft-annealed condition followed by hardening, tempering and final machining.

Toolox® 44 is supplied prehardened and ready to use, which can eliminate the need for additional hardening in many applications. This simplifies the manufacturing process and reduces the risk of distortion and dimensional changes associated with heat treatment.

Compared with conventional 1.2343 and 1.2344, Toolox 44 can offer:

•Fewer manufacturing steps

•No additional hardening required for many applications

•Shorter production lead times

•Lower risk of distortion

•Excellent dimensional stability

•High toughness at a high hardness level

•Very good vibration damping

•More predictable manufacturing costs

Why Choose Toolox®44?

•Prehardened, stress-relieved and ready for machining

•Typical hardness of approximately 45 HRC

•High hardness combined with excellent toughness

•Excellent dimensional stability and low residual stresses

•Good wear and fatigue resistance

•Very good vibration damping properties

•High resistance to thermal and mechanical loads

•Good wear resistance at elevated temperatures

•Excellent machinability for its hardness level

•Suitable for nitriding and other surface treatments

Typical Applications

Toolox® 44 is suitable for a wide range of demanding applications, including:

•Aluminium die-casting tools

•Forging and forming tools

•Trimming tools

•Extrusion tools

•Bending and stamping tools

•Injection mold components

•Tool holders and highly loaded machine components

•Wear parts operating at elevated temperatures

•Components exposed to vibration and dynamic loads

Toolox tabela1

Tool Steel and Wear-Resistant Steel

Thanks to its combination of high hardness, toughness and thermal stability, Toolox® 44 can be used not only as a tool steel but also as a wear-resistant engineering steel for applications operating at elevated temperatures.

This makes Toolox® 44 particularly attractive for components exposed to a combination of wear, mechanical loads, vibration and increased operating temperatures, where conventional wear-resistant steels may reach their limitations.

Its very good vibration damping properties are an additional advantage for tool holders, machine components and dynamically loaded parts, helping to improve stability during operation.

Reduce Production Time and Costs

One of the main advantages of Toolox® 44 is its prehardened delivery condition. Eliminating additional hardening can significantly simplify tool production, shorten lead times and reduce the risk of costly distortion during heat treatment.

For applications traditionally manufactured from 1.2343 or 1.2344, Toolox® 44 provides an efficient solution combining high hardness, excellent toughness, dimensional stability, vibration damping and wear resistance at elevated temperatures.

Damatech supplies Toolox® 44 together with processing services and technical support, helping customers optimize material selection and the complete manufacturing process.

Applications

Tech Support

Toolox® Documents to Download

Toolox Downloads

Toolox Steel Grades & Shapes