Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

STRENX® 960

PUSH STRENGTH. CUT WEIGHT

Higher strength for lighter, high-performance structures

img-Strenx1-600-600-p-L-97.png

High-Strength Steel for Advanced Lightweight Structures

Strenx® 960 is an advanced high-strength structural steel developed for demanding applications where very high strength, low structural weight and reliable performance are essential.

With a minimum yield strength of approximately 960 MPa, Strenx® 960 enables manufacturers to design lighter and stronger structures compared with conventional structural steels and lower-strength high-strength grades.

Its combination of very high strength, toughness and excellent fabrication properties makes Strenx® 960 particularly suitable for lifting equipment, transport solutions and highly loaded structures where weight reduction can provide significant operational benefits.

Very High Strength. Lower Structural Weight.

The key advantage of Strenx® 960 is its very high yield strength.

In suitable applications, the increased strength allows designers to reduce material thickness while maintaining the required load-bearing capacity. This can significantly reduce the weight of structural components and complete equipment.

Why Choose Strenx® 960?

Very High Yield Strength

With a minimum yield strength of approximately 960 MPa, Strenx® 960 provides exceptional structural strength.

This makes it possible to design highly loaded components with optimized dimensions and significantly reduced weight compared with conventional structural steels.

Greater Potential for Weight Reduction

The high strength of Strenx® 960 creates opportunities to use thinner sections in suitable applications.

For mobile equipment, cranes and lifting systems, lower structural weight can be particularly valuable because it can contribute to increased payload or lifting capacity.

High Toughness

Strenx® 960 combines very high strength with high toughness, providing reliable performance in structures exposed to demanding static and dynamic loads.

This balance is particularly important for highly loaded welded structures and mobile equipment.

Excellent Weldability

Despite its very high strength, Strenx® 960 is designed for efficient fabrication.

Using appropriate welding procedures and consumables, manufacturers can produce complex high-strength welded structures while maintaining reliable performance.

Good Formability

Strenx® 960 can be cold formed using appropriate equipment and recommended bending procedures.

This provides designers and manufacturers with flexibility when producing complex high-strength structural components.

Typical Applications

Strenx® 960 is particularly suitable for:

•Crane booms

•Mobile cranes

•Lifting equipment

•Aerial work platforms

•Truck-mounted lifting systems

•Transport equipment

•Heavy-duty trailers

•Highly loaded chassis and frames

•Construction machinery

•Material-handling equipment

•High-strength structural components

Weight reduction can provide several advantages:

•Higher payload capacity

•Lower equipment weight

•Reduced material consumption

•Improved energy efficiency

•Increased lifting capacity

•More efficient transportation

•Improved overall equipment performance

The achievable weight reduction depends on component geometry, loading conditions, stiffness, fatigue requirements and applicable design standards.

Strenx® 960 vs. Conventional Structural Steel

Conventional structural steels require significantly more material to achieve the same load-bearing capacity in strength-controlled applications.

The much higher yield strength of Strenx® 960 allows engineers to optimize plate thickness and component geometry, creating structures that can be both lighter and stronger.

The greatest benefits are therefore achieved when the complete component is redesigned around the properties of high-strength steel rather than simply replacing the existing material at the same thickness.

This approach can lead to:

•Lower structural weight

•Reduced material consumption

•Higher payload or lifting capacity

•More efficient equipment

•Optimized structural design

Designed for Highly Loaded Structures

Strenx® 960 is particularly suitable for applications where very high mechanical loads must be combined with minimum structural weight.

Its high strength-to-weight ratio makes it especially attractive for mobile equipment, where reducing the weight of the structure can directly improve equipment performance.

More Strength. Less Weight.

Strenx® 960 combines approximately 960 MPa minimum yield strength with high toughness and excellent fabrication properties, providing manufacturers with greater freedom to optimize demanding steel structures.

Compared with conventional structural steels and lower-strength grades, Strenx® 960 can create greater opportunities for weight reduction while maintaining the required structural performance.

For manufacturers of cranes, lifting systems, transport equipment and highly loaded machinery, this can mean lighter structures, higher payload or lifting capacity, lower material consumption and improved equipment efficiency.

Choose Strenx® 960 when very high structural strength and minimum weight are critical to the performance of your equipment.

Damatech supplies Strenx® 960 together with processing services and technical support, helping customers select the appropriate material thickness and optimize the complete manufacturing process.

Tech Support

Strenx® Documents to Download

Strenx Downloads

Strenx Steel Grades