Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

STRENX® 700

MORE STRENGTH. LESS WEIGHT

High strength for lighter, stronger structures

img-Strenx_7001-600-600-p-L-97.jpg

High-Strength Structural Steel for Lighter and Stronger Structures

Strenx® 700 is a high-strength structural steel designed for demanding applications where high strength, low weight and reliable structural performance are essential.

With a minimum yield strength of approximately 700 MPa, Strenx® 700 enables manufacturers to design stronger and lighter structures compared with conventional structural steels. By using thinner material while maintaining the required load-bearing capacity, equipment weight can be reduced without compromising structural performance.

This makes Strenx® 700 particularly attractive for transport equipment, lifting systems, heavy machinery and other applications where every kilogram matters.

High Strength. Lower Weight.

The key advantage of Strenx® 700 is its combination of high yield strength and excellent structural properties.

Why Choose Strenx® 700?

High Yield Strength

With a minimum yield strength of approximately 700 MPa, Strenx® 700 provides significantly higher strength than conventional structural steels.

This allows engineers to develop highly loaded structures with optimized dimensions and reduced weight.

Lighter Structures

Higher-strength steel can make it possible to use thinner material in suitable applications.

For mobile equipment such as trailers, cranes and lifting systems, reducing structural weight can increase payload capacity and improve overall equipment efficiency.

Excellent Toughness

Strenx® 700 combines high strength with excellent toughness, providing reliable performance in demanding structures exposed to dynamic and mechanical loads.

This balance between strength and toughness is particularly important for highly loaded welded structures.

Excellent Weldability

Despite its high strength, Strenx® 700 is designed for efficient fabrication and welding.

With appropriate welding procedures, it can be integrated into complex welded structures while maintaining reliable mechanical performance.

Good Formability

Strenx® 700 can be bent and formed using appropriate equipment and recommended procedures.

This enables manufacturers to produce complex high-strength components while taking advantage of the material's high yield strength.

More Strength with Less Steel

Conventional structural steels often require thicker sections to achieve the required load-bearing capacity.

Strenx® 700 provides an opportunity to rethink this approach.

By using higher-strength steel, designers can optimize plate thickness and component geometry to achieve the required structural performance with less material. This can result in lighter structures, reduced material consumption and improved equipment performance.

Rather than simply replacing conventional steel with the same thickness of Strenx® 700, the greatest benefits are often achieved by optimizing the complete design around the higher strength of the material.

Designed for Demanding Structural Applications

Strenx® 700 is particularly suitable for applications exposed to high static and dynamic loads where structural strength and weight optimization are important.

Its combination of high yield strength, toughness, weldability and formability makes it an effective solution for manufacturers looking to improve the performance of modern steel structures.

Typical Applications

Strenx® 700 is particularly suitable for:

•Truck and trailer structures

•Tipper and transport equipment

•Cranes and lifting equipment

•Crane booms

•Agricultural machinery

•Construction equipment

•Heavy machinery

•Chassis and frames

•Load-bearing structures

•Material-handling equipment

•Highly loaded structural components

Compared with conventional structural steels, its higher strength can allow designers to reduce plate thickness in suitable applications. This can result in lighter components and structures while maintaining the required strength and safety.

Weight reduction can provide several advantages, including:

•Higher payload capacity

•Lower overall equipment weight

•Reduced material consumption

•Improved energy efficiency

•More efficient transportation

•Increased structural performance

The actual potential for weight reduction depends on the design, loading conditions, stiffness requirements and applicable design standards.

Stronger. Lighter. More Efficient.

Strenx® 700 combines approximately 700 MPa yield strength with excellent toughness, weldability and fabrication properties, providing manufacturers with greater freedom to design lighter and stronger structures.

For applications traditionally manufactured from lower-strength structural steels, Strenx® 700 can create opportunities to reduce weight, increase payload capacity, lower material consumption and improve overall equipment efficiency.

Choose Strenx® 700 when high structural strength, lower weight and efficient production are essential for the performance of your equipment.

Damatech supplies Strenx® 700 together with processing services and technical support, helping customers select the right material thickness and optimize the complete manufacturing process.

Tech Support

Strenx® Documents to Download

Strenx Downloads

Strenx Steel Grades