Damatech
High Performance SteelValue Added ProcessingInnovative Industrial SolutionsDamatech

Laser Cutting

laser cutting 600

High-Power Fiber Laser Cutting of Pre-hardened Steels

High precision. Excellent cut quality. Reduced heat-affected zone.

Fiber laser technology has developed rapidly in recent years. With modern high-power systems, it is now possible to cut not only thin sheets but also heavy plates made from quenched and tempered steels.

Our 30 kW fiber laser enables the cutting of steel plates up to 50 mm thick, depending on the steel grade and required cut quality. This makes fiber laser cutting an efficient solution for processing high-performance steels such as Toolox®, Hardox®, Strenx® and 42CrMo4 QT.

Better cut quality and greater accuracy

Compared with plasma cutting, fiber laser technology provides a narrower cutting kerf, greater dimensional accuracy and improved edge quality. Complex contours, small openings and precise geometries can be produced with less need for subsequent machining.

The main benefits include:

•High cutting speed and productivity

•Greater dimensional and contour accuracy

•Excellent repeatability

•Narrower cutting kerf

•Improved cut-edge quality

•Reduced need for finishing and machining

•Efficient material utilisation


Reduced heat-affected zone

When cutting with an optimised oxygen–nitrogen gas mixture, the heat-affected zone can be significantly reduced compared with conventional plasma cutting. This helps limit thermal changes along the cut edge and reduces the amount of material that may need to be removed before subsequent machining.

The combination of high laser power and carefully selected cutting gases provides a reliable balance between cutting speed, edge quality and thermal influence.

An efficient solution for near-net-shape cutting

The high precision of fiber laser cutting allows components to be cut close to their final geometry. Less material must therefore be removed by subsequent machining, resulting in shorter production times, lower tooling costs and reduced material waste.

From individual components and complex contours to larger production series, our 30 kW fiber laser delivers a fast, accurate and cost-efficient solution for cutting quenched and tempered steel plates.

Up to 50 mm thickness. Higher precision. Better cut quality. Reduced thermal influence.