C45
RELIABLE STEEL. PROVEN PERFORMANCE
Versatile engineering steel for reliable machine components

General-Purpose Tool Steel
1.1730 / C45 is a versatile, unalloyed tool steel widely used for general toolmaking, machine components, fixtures and engineering applications.
It offers a practical combination of good machinability, toughness and heat-treatment capability, making it a cost-efficient choice for tools and components where extremely high hardness or wear resistance is not required.
Versatile Steel for Toolmaking
1.1730 is a proven material for the manufacture of tools, fixtures, support plates and general engineering components.
Its relatively simple chemical composition and good machinability make it particularly suitable for applications where efficient manufacturing and reliable mechanical properties are more important than the very high wear resistance provided by highly alloyed tool steels.
The material can be supplied and machined in a relatively soft condition and subsequently heat treated when higher hardness is required.
Good Machinability and Efficient Processing
One of the main advantages of 1.1730 is its good machinability, allowing components to be produced efficiently using conventional machining processes.
This provides several practical advantages:
•Efficient milling, turning and drilling
•Shorter machining times
•Good surface finish
•Easy production of complex geometries
•Cost-efficient manufacturing
For applications requiring increased hardness and wear resistance, the material can be hardened after machining.
Why Choose 1.1730?
•Unalloyed tool steel
•Good machinability
•Good toughness
•Suitable for hardening
•Good dimensional accuracy during machining
•Suitable for general toolmaking
•Easy to process and finish
•Cost-efficient material for a wide range of applications
•Suitable for tools and machine components subjected to moderate loads
Typical Applications
1.1730 is widely used in toolmaking, mould making, machine building and general mechanical engineering.
Typical applications include:
•Tool and die components
•Support and backing plates
•Jigs and fixtures
•Guides
•Gauges
•Templates
•Machine components
•Holders and supports
•Simple cutting and forming tools
General workshop tooling
1.1730 vs. Prehardened Tool Steels
Unlike prehardened steels such as Toolox®, 1.1730 is typically selected when high hardness throughout the supplied material is not required.
It provides a more economical solution for general-purpose tooling, support components and moderately loaded parts, while prehardened tool steels are better suited to applications requiring higher strength, wear resistance and dimensional stability directly in the delivery condition.
The choice depends on the required hardness, wear resistance, manufacturing process and operating conditions.
Reliable and Cost-Efficient Tool Steel
1.1730 / C45W is a proven solution for applications requiring a combination of good machinability, toughness, straightforward processing and cost efficiency.
Its versatility makes it particularly suitable for general toolmaking and engineering components where the performance of highly alloyed or prehardened tool steels is not necessary.
Damatech supplies 1.1730 / C45W together with value-added processing services and technical support, helping customers select the right dimensions and develop efficient solutions from raw material to finished component.
1.1730 – versatile tool steel for efficient and reliable toolmaking.
One Supplier for Toolmaking Steels
Our objective is not simply to offer more steel grades, but to provide the right material for each part of the tool.
Toolox provides high-performance prehardened solutions for demanding tool and engineering applications. 42CrMo4 QT extends the range where improved hardenability for induction or laser hardening is required, while 1.1730 covers conventional toolmaking and supporting components.
Together, these materials allow Damatech to provide toolmakers with a comprehensive plate portfolio:
Toolox® + 42CrMo4 QT + 1.1730 = a complete steel solution for toolmaking.
Combined with our cutting, machining, processing and technical support, Damatech can supply everything from raw plates and cut-to-size blanks to processed components.
One supplier. The right steel for every part of the tool.
Tech information
Mechanical Properties
In normalized condition, +N
Debelina (mm) | <16 | 16 < t <100 | 100 < t < 250 |
|---|---|---|---|
Meja plastičnosti Rp0,2 [N/mm2] | min. 340 | min. 305 | min. 275 |
Natezna trdnost Rm [N/mm2] | min. 620 | min. 580 | min. 560 |
RaztezekA5 [%] | min. 14 | min. 16 | min. 16 |
Chemical Composition
Steel | C | Si | Mn | Cr | Mo | S | Others |
|---|---|---|---|---|---|---|---|
C45 | 0,42% | <0,40% | 0,50% | <0,40% | 0,22% | <0,035% | (Pb> |
