Aluminum Die Casting Moulds

Optimizing Aluminium Die Casting Moulds with Toolox 44
In aluminium die casting, moulds are exposed to demanding operating conditions, including repeated thermal cycling, mechanical loads and wear. The choice of tool steel therefore has a major impact on mould manufacturing, dimensional accuracy, service life and overall production costs. Toolox 44 offers an efficient solution for aluminium die casting moulds and mould components. Thanks to its combination of high hardness, toughness, dimensional stability and excellent machinability, it can significantly simplify the production of moulds compared with conventional tool steel routes.
Pre-hardened – ready for machining
Toolox 44 is supplied pre-hardened to 410–475 HB, which means that the material already has its mechanical properties when delivered.
In many applications, this eliminates the need for conventional hardening after machining. Moulds and mould components can therefore be machined directly to their final dimensions, reducing the number of production steps and shortening lead times.
Improved dimensional stability
One of the major challenges in die mould manufacturing is dimensional change caused by heat treatment. Conventional tool steels often require machining, heat treatment and subsequent finishing operations to achieve the required final geometry.
Toolox 44 is manufactured with low residual stresses and high dimensional stability. By avoiding conventional hardening after machining, the risk of distortion can be significantly reduced.
This is especially valuable for larger moulds and components where maintaining dimensional accuracy is critical.
Fewer production steps
Using Toolox 44 can simplify the entire mould manufacturing process:
material → machining → finishing → ready for use
Eliminating additional hardening and reducing corrective machining means fewer production stages, less handling and shorter manufacturing times.
The result is a more predictable production process and the potential for lower total mould manufacturing costs.
Surface treatment for demanding areas
Where additional surface hardness or wear resistance is required, Toolox 44 can also be combined with suitable surface treatments such as nitriding. This allows the properties of the mould surface to be optimized while maintaining the strength and toughness of the pre-hardened Toolox base material.
Toolox for aluminium die casting applications
Toolox 44 can be considered for various components within aluminium die casting tooling, including:
• mould plates and inserts
• core and cavity components
• slides and other highly loaded mould parts
• support and structural mould components
The optimum material and surface treatment should always be selected according to the specific operating conditions of the component.
From Steel Plate to Finished Mould Component
At Damatech, we support customers not only with Toolox material supply, but also with material selection, cutting, machining and additional processing through our network of specialized partners. Together with the customer, we can evaluate where Toolox 44 can simplify mould production, reduce manufacturing steps and provide a more efficient route from steel plate to finished die casting component.
Looking for a more efficient solution for your aluminium die casting moulds? Contact Damatech and let us find the right Toolox solution for your application.
