SIENDE

Pre-hardened tempering steel for toolmaking and mechanical engineering

Thanks to the high investments of our core supplier SSAB in research and development, the remuneration process was optimized and a tool steel with a lower alloy and excellent mechanical properties was developed: Toolox. Toolox is an extra high-strength steel which is delivered as hardened steel and is therefore ideal for tool steel and machine construction.

High crack resistance, weight reduction of the components, time saved by pre-heat-treated and ready-to-use delivery are just a few of the advantages of using Toolox.

Each reimbursement unit is subjected to a comprehensive quality control, including US testing and strength testing, so that the quality of its unique properties in comparison to other standard products can be ensured.

Toolox tool steel and machine construction is available in hardnesses of 300, 400 and 450 HB. Plates are available in thicknesses of 6 to 160 mm and rods of 20 to 140 mm. Toolox 33 and Toolox 44 are also available.

CHARACTERISTICS

Polishing, etching and coating

Excellent for polishing, etching and coating.

Cost savings

Cost savings from longer life due to less wear and chipping.

MEASUREMENTS

TOOLOX ALTERNATIVES

Toolox 33 substitutes

W. Nr. DIN EN ISO 4957 AISI AISI Application fiels
10.037 - - St37-2 Machine Components
10.044 - - St44-2 Machine Components
10.503 C45 1045 EN 8 Machine Components
10.507 - - St52-3 Machine Components
10.601 C60 1060 EN9 Machine Components
11.191 Ck45/C45E 1045 Machine Components
11.730 C45W/C45U 1045 Machine Components
12.311 40CrMnMo7 P20 Moulding, Mould Bases
12.312 40CrMnNiMo8-6-4 P20+Ni IMPAX Moulding, Hot Working, Machine Components
- - - EN16 Machine Components
16.523 20NiCrMo2-2 8620 Machine Components
16.565 40NiCrMo6 4340 EN24 Machine Components
16.587 17CrNiMo6 4820 Machine Components
17.214 25CrMo4 4130 Machine Components
18.550 34CrAINi7 - Machine Components

Toolox 44 substitutes

W. Nr. DIN EN ISO 4957 AISI Brand Application Field
12.080 X210Cr12 D3 Cold Working
12.343 X37CrMoV5-1 H11 St44-2 Moulding, Hot Working
12.344 X40CrMoV5-1 H13 ORVAR2M Moulding, Hot Working
- - - DIEVAR Moulding, Hot Working
12.358 60CrMoV18-5 - CALMAX Cold Working
12.363 X100CrMoV5-1 A2 RIGOR Cold Working
12.365 32CrMoV12-28 H10 Moulding, Hot Working
12.367 X38CrMoV5-3 - Moulding, Hot Working
12.379 X153CrMoV12 D2 SVERKER 21 Cold Working
12.436 X210CrW12 D6 SVERKER 3 Cold Working
12.510 100MnCrW4 O1 ARNE Cold Working
12.550 60WCrV7 S1 Cold Working
12.714 56NiCrMoV7 L6 Moulding, Cold Working, Hot Working
12.718 55NiCr10 P20+Ni Moulding, Cold Working, Hot Working
12.738 40CrMnNiMo8-6-4 P20+Ni IMPAX Moulding, Hot Working, Machine Components
12.761 - - Moulding, Hot Working
12.767 X45NiCrMo4 6F7 Machine components, Cold Working
12.842 Cold Working
16.511 36CrNiMo4 9840 Machine Components
16.580 30CrNiMo8 - Machine Components
16.528 34CrNiMo6 4337/4340 EN24 Machine Components
16.587 17CrNiMo6 4820 Machine Components

1. Ready to use

Toolox is a mechanical engineering and tool steel supplied in a tempered state with guaranteed mechanical properties and EN 10204 3.1 certified.

2. Stable

Toolox machine construction and tool steel has a low residual stress with a low warpage risk.

3. Good workability

Toolox has a homogenous structure with few inclusions, comparable to ESU properties, that are ideally suited for glass-fiber reinforced plastic components. The high toughness of Toolox is a prerequisite for surface technology (nitriding / PVD coating).

4. Cheap price packages

We offer Toolox for a competitive price. You can save operating costs and time and avoid risks by using Toolox tool steel.

5. Toolbox advantages

High crack resistance, weight reduction of the components, time saved by pre-heat-treated and ready-to-use delivery are just a few of the advantages of using Toolox.

Damatech d.o.o.

Cesta Franceta Prešerna 63 SI-4270 Jesenice, Slovenia

T: +386 5 923 55 00
F: +386 5 923 55 01
E-mail: sales@damatech.com

X
CONTACT
 

Contact us

Send us a message and we will reply as soon as possible.

Damatech d.o.o.
  • Cesta Franceta Prešerna 63
  • SI-4270 Jesenice, Slovenia
  • T: +386 5 923 55 00
  • F: +386 5 923 55 01
  • E: sales@damatech.com