Hardox 500 is a
wear-resistant sheet with a hardness of 500 HBW which is particularly suitable
for applications with high demands forwear resistance.
Depending on the application area, Hardox 500 or Hardox 500 is recommended for the sieve. It is important that the cutting edges of the sieve have a high quality, since otherwise cracks can occur during bending.
Hardox 450 or Hardox 500 is used for covering conveyor belts as well as for use in continuous chains.
When using crushing tools such as industrial knives and shears, wear is natural. The influencing factor of the market leaders differ from other companies, is the material of the wear parts which essentially influences their service life.
To protect against wear, the coils are dressed with a strip of Hardox.
The material recommendation goes to Hardox HiTUF or Strenx 700 for the body of the gripper, whereby the Hardox 500 cutting edges should be used.
The paddle or scraper can be made from both Hardox 500 and Hardox 550.
The field chopper is made of Hardox 500 with a thickness of 8 mm.
Send us a message and we will reply as soon as possible.