Thanks to the use of wear-resistant steel such as Hardox 500, Hardox 550 or Hardox 600, the life of the shredders can be increased by up to 40%, leading to a reduction of downtimes and an increase in productivity.
The material recommendation goes to Hardox HiTUF or Strenx 700 for the body of the gripper, whereby the Hardox 500 cutting edges should be used.
Hardox 450 is recommended for the housing of the bale press. Hardox 500 is usually used for the shipping edge and the shear bar.
For material use, we recommend the roller and inlet Hardox 450; Due to the heavy wear on the teeth and the resulting wear, Hardox 550 or Hardox 600 are suitable.
Send us a message and we will reply as soon as possible.