Knife seats must be dimensionally stable and also tough due to the high dynamic loads. Due to its low residual stress, Toolox 33 is highly suitable.
Tools for bending metal sheets are subjected to severe mechanical wear and must be dimensionally stable. Toolox 33 is ideally suited for high toughness (100J) and low internal residual stress.
Toolox is used for machine parts that require high toughness, low internal residual stress, and exceptional dimensional stability.
Sheet metal cutters in rolling mills must withstand dynamic loads at high temperatures, so Toolox 44 is best suited. Toolox 44 has a high tensile strength and can be used as a wear-resistant steel at elevated temperatures.
An engine's camshaft is dynamically stressed. It must be dimensionally stable and breakable. Therefore, the steel must be tough and dimensionally stable: all these criteria apply to Toolox 33.
In metallurgy, Toolox 44 is used wherever high toughness and good wear resistance at elevated temperatures are required.
Send us a message and we will reply as soon as possible.